Tyrell Chandelier - 4-Light - Polished Nickel

Start with a simple rule: add the room length and width (in feet) to estimate fixture diameter (in inches). For example, a 12'×14' room suggests ~26". Always confirm with the product’s actual dimensions and your layout.

For 8-ft ceilings, aim for 30–34 inches from tabletop to the lowest point of the chandelier. Add roughly 3 inches for each additional foot of ceiling height, and keep sight lines clear across the table.

Maintain at least 7 feet of clearance from the floor to the bottom of the fixture (more in high-traffic areas). For visual balance, total fixture height in inches can be ~2.5–3× the ceiling height in feet—adjust to the room scale.

Dining and living areas benefit from layered light. As a starting range, plan roughly 20–30 lumens per square foot across all sources, and put the chandelier on a compatible dimmer for comfort and scene control.

Warm to warm-neutral light (≈2700–3000K) is popular for dining/living. For accurate color and decor rendering, look for CRI 90+ when available. Keep color temperature consistent across nearby fixtures.

Yes—use a slope-adapter canopy or chain/cord-hung models that naturally hang plumb. Verify the canopy’s maximum slope rating in the spec sheet and order appropriate downrods if needed.

Use a properly rated ceiling box (fan/fixture support) that exceeds the chandelier’s weight and is secured to framing. Confirm junction-box location, canopy size, and included hardware before installation.

Over a table, many designers choose a fixture that’s about one-half to two-thirds the table width. In open rooms, keep proportions with furniture groupings and circulation paths, not just the room envelope.

Turn power off, dust regularly with a microfiber duster, and clean crystals or glass with mild soap and water. Avoid harsh chemicals on metal finishes, and periodically check chain links and set screws for safety.

Use dry-rated fixtures for most indoor rooms, damp-rated for areas with humidity (e.g., bathrooms away from direct spray), and wet-rated where water may contact the fixture (e.g., covered or exposed outdoor spaces). Always follow local code.