LED Gooseneck - 30W/40W/50W - CCT Selectable 3K/4K/5K - White - 120-277V - With Photocell

Gooseneck lights use a curved arm and metal shade to throw controlled light onto signs, awnings, barns, or wall features with minimal uplight.

Pick arm length to reach the sign face and a shade diameter that covers the target without spill. Use photometric guides where available.

Choose shades with cut-off and optional hoods to limit uplight and glare. Dark-sky friendly designs keep light on the target surface.

Integrated LED provides high efficacy and long life; screw-base lets you swap lamps easily. Match to maintenance needs and control type.

Yes—use proper anchors for brick/block and ensure the junction box is exterior-rated. Verify canopy size and bolt pattern for your wall surface.

For signage, 3000–4000K is typical. Use wide floods for even coverage or narrower optics for accenting. Align fixtures to avoid streaks.

Many models dim with triac/ELV or 0–10 V depending on the driver. Confirm compatibility with your control system.

Specify wet-rated fixtures with architectural powder coat or marine-grade options for coastal sites. Stainless hardware resists corrosion.

Use exterior-rated boxes, sealant, and drip loops. Follow the manufacturer’s gasket and fastener instructions to keep water out.

Rinse debris, wash shades with mild detergent, and inspect gaskets and hardware annually. Touch up finishes as needed in harsh climates.