Direct Wire Slim-Line LED Picture Light - Antique Brass

A common rule is a light roughly half to two-thirds the width of the artwork; wider pieces may use twin heads or wall washers.

Plug-in is easy and flexible; battery is wire-free for rentals; hardwired is the cleanest look with wall control. Choose based on access and aesthetics.

2700–3000K is warm and museum-friendly; CRI 90+ renders pigments accurately. Avoid excessive blue content for sensitive works.

Mount above the frame and aim 30–45° downward to graze the surface evenly without hotspots or shadows.

Most LED picture lights dim with triac/ELV wall dimmers or onboard controls. Use low-flicker drivers for camera-friendly scenes.

Quality LEDs emit minimal UV and low heat at the art surface. Keep adequate spacing and avoid halogen heads that can heat pigments.

Use anti-reflective glass and angle the beam to avoid viewer sightlines. Softer, diffused optics help on glossy works.

Black, bronze, brass, and nickel finishes typically coordinate with frame hardware. Match or complement the frame’s tone and style.

Hardwire behind the artwork or route a recessed clock outlet; use paintable cord covers when hardwiring isn’t feasible.

Dust the head and frame, check aim after rehanging or cleaning, and replace aged batteries or drivers to keep output consistent.